2010

Team members: Martin Carbajal Mike Mellman Curtis Porter Erik Zurinkas Our team proposes to create an electronically controlled lawn mower robot that will autonomously mow a lawn with minimal user input. We would like our robot to be able to move on its own. The lawn mower will be powered...

Team members: Anil Damli Matanya Horowitz Kirk Liu Mark VanKempen Steve Willson Rock climbing has rapidly grown in popularity over the last several years. As increasingly large numbers of climbers have joined the sport, there has been a question as to the routes available at indoor gyms. A balance must...

Team members: Kristen Aragon Greg Smith Steve Sorenson John Streuber Anand Suchak This project is primarily designed for use by a skier or snowboarder; it has two main purposes, control and monitoring. It will provide a user with a touch-less method of controlling an mp3 player and it will also...

Team members: Charles Chen Katie Corner Dan Costinett Bob Pomeroy Jeries Shihadeh The objective of this project is to design, prototype, and test a "Camera Grenade." The camera grenade is a small hand-held ball, which when thrown into An area, captures a panoramic series of photographs which can be viewed...

Team members: Nathan Gimple Amit Halevi Noah Husek Steve Tighe In short, we are building an LED cube. This is intended to be primarily an artistic piece: a 3-D light sculpture. The cube will be 8 by 8 by 8 nodes (the node spacing will probably be 7 inches). Therefore...

Team members: Blake Davis Luke Haberkern Brian Hacsi Chris Kircher The HandyMan is a universal controller which interprets the motion of a user's hand into generic sets of instructions that can be broadcast using Bluetooth. This will be achieved by an array of sixteen sensors on the hand and wrist...

Team members: Jake Baldwin Krista Hasling Moghaddam-Zadeh Jack Oakes Scott Wisdom The goal of our Capstone senior design project is to build a remote monitoring and control module for a water purification system. These purification systems are intended to provide clean water to schools throughout Rwanda. Our Capstone group is...

Team members: Kaylee Bush Mike Killian Ian Rees Andy Rogowski Chris Tooley Our project is a pool cue with embedded sensors to measure the displacement of the cue as a stroke is being made. The sensors will relay the data to a receiver wirelessly and the receiver will then run...